BM2588
12P X 0.75 Sqmm Shielded BMS Armoured FRLSH Cable
Stranded Annealed Bare Copper Conductor, PVC Insulated, Twisted Pair, Overall Shielded with Aluminium-Mylar tape in contact with ATC Drain Wire, PVC Inner Jacket, GI Wire Armoured and Overall FRLSH PVC Jacketed Shielded BMS Armoured FRLSH Cable. ART, UV, RoHS, REACH, 300/500 V, BS EN: 50288-7 & IS: 1554-1
No Data Sheet Available
Suitable Applications
- Security Systems
- Burglar Alarm
- Intercom / PA-System
- Cabinet / Panel Wiring
- Power Limited Circuits
- Voice Communications
- Noisy Environment
- Control Digital Signals
- Suitable for Upto 500 V Applications
Special Features
- Anti Rodent & Termite Properties
- Mechanical Protection
- RoHS & REACH Compliant
- UV Resistance
- Passes IEC: 60332-1, Flame Rating
- EMI / RFI Protection
Faster Signal Transmission
EMI / RFI Protection
Minimum Signal Degradation
Mechanical Protection
5 Years Warranty
General Reference Standards
BS EN: 50288-7, IS: 1554-1
IEC: 60228, IS: 5831, IS: 3975
ASTM D: 2843, ASTM D: 2863, IEC: 60754-1, IEC: 60332-1
Construction and Dimensions
Conductor
| Material | Stranded (Class 2) Annealed Bare Copper Conductor |
| Grade | Electrolytic |
| Area of Conductor | 0.75 Sqmm |
| No. of Strands | As per Class 2 |
| Diameter of Each Strand [Before Stranding] | As per Class 2 |
| Shape of Conductor | Stranded and Circular |
Insulation
| Material | PVC Compound |
| Type of Process | Extruded |
| Thickness [Min.] | 0.44 mm |
| No. of Pairs | 12 Pair |
Cable Formation
| Pair | 2 Core twisted with an optimal lay length to form a pair |
| No. of Twists [Min.] | 10 Twists per meter in a pair |
| Laid-up | 12 Pair Lay Up in Concentrically to form a Circular Cable |
Overall Shielding
| Material | Aluminium-Mylar Tape |
| Type of Process | Helically |
| Thickness [Min.] | 0.032 mm |
| Overlap/Coverage [Min.] | 25% / 100% |
| Binder Tape [If required] | Polyester tape shall be provided Below and/or Over Shielding |
Drain Wire
| Material | Annealed Tinned Copper (ATC) |
| Type | Laid longitudinally, In contact with metallic side of Al-Mylar tape |
| Area of Drain Wire | 0.50 Sqmm |
Inner Jacket
| Material | PVC Compound |
| Type of Process | Extruded |
| Thickness [Min.] | 0.3 mm |
Armouring
| Material | Galvanised Steel Round Wire |
| Layer | Single Layer |
| Size of Armour [Nom.] | 0.9 ±0.030 mm |
Outer Jacket
| Material | FRLSH PVC Compound |
| Type of Process | Extruded |
| Thickness [Min.] | 1.40 mm |
| Overall Cable Diameter | 20.4 ± 2.0 mm |
Cable Colour Coded
| Pair Identification | White and Blue with Numbering |
| Inner Jacket | Black |
| Outer Jacket | Blue |
Packing and Marking
| Printing on Cable |
< AGILON > < 12P X 0.75 SQ MM > < SHIELDED BMS ARMOURED FRLSH CABLE > < 300/500 V > < ART > < UV > < RoHS > < REACH > < Year > |
| Sequential Length Marking | At every one meter of interval |
| Standard Packing Length | 1000 meters |
| Packing Material | Packing shall be done in Non-returnable wooden drum |
| Tolerance on Length | ±5% Tolerance |
Electrical Characteristics
| Voltage Grade | 300/500 V |
| Max. DC Conductor Resistance | 27.0 Ω/km at 20°C |
| Min. Insulation Resistance | 10 MΩ/km at 20°C |
| Max. Mutual Capacitance [C-C] | 250 nF/km at 1 KHz |
| Max. Mutual Capacitance [C-S] | 450 nF/km at 1 KHz |
| Max. L/R Ratio | 25 μH/Ω |
| High Voltage Test [C-C] | 2 kVac rms for 1 Minute |
Mechanical Characteristics
Maximum Conductor Temperature
| Continuous Operation | 70°C |
| During Short Circuit | 160°C |
Bending Radius [Min.]
| During Installation | 12 x OD; (Where OD is the Overall Diameter of Cable) |
| Fixed Installation | 10 x OD; (Where OD is the Overall Diameter of Cable) |
Properties Before Ageing [For Insulation]
| Tensile Strength, Min. | 12.5 N/mm² |
| Elongation at Break, Min. | 150% |
Properties Before Ageing [For Jacket]
| Tensile Strength, Min. | 12.5 N/mm² |
| Elongation at Break, Min. | 150% |
Environmental and Overall Characteristics
Installation
| Suitability | Indoor / Outdoor |
| Temperature Range |
Fixed Installation: -15°C to +70°C During Installation: +10°C to +60°C |
FRLSH Properties
and Tests
and Tests
| Oxygen Index | ≥ 30% at 27±2°C; (When tested as per ASTM D: 2863) |
| Temperature Index | ≥ 250°C; (When tested as per ASTM D: 2863) |
| HCL Gas Emission | ≤ 20% [By weight]; (When tested as per IEC: 60754-1) |
| Smoke Density Rating | ≤ 60%; (When tested as per ASTM D: 2843) |
| Flame Retardant Test | IEC: 60332-1-2 |
Compliance
| Anti Rodent & Termite Properties | Yes |
| UV Resistance | Yes |
| RoHS & REACH Compliant | Yes |
All Rights Reserved © 2025, Agilon Cables India Private Limited
Agilon pursues publishing accurate data,unpredictable variables may result in inadvertent inaccuracies and incompleteness. The details presented herein, though reasonably verified, remain susceptible to unintentional typos or information gaps. Further, product specifications tend to frequently evolve based on ongoing research and feedback. They are subject
to modifications without explicit advance intimations or obligations Also note that Drawings/Images are intended for illustration purposes only and actual product may be vary.